Radial Flow Head

• Radial flow improves cooling, adds uniform stress characteristics, and reduces or eliminates cracking.
• Standard use of through hardened valve guides which resists wear and aids in prolonging valve life.

Laser Hardened Upper Bore Liner

• Improved liner stud bosses reduce bore distortion.
• Precision laser hardening process gives an increased hardened surface area.

Preminum Piston

• Hardened upper ring groove significantly reduces ring groove wear.
• Tin plated skirt aids lubrication during break in and reduces scuffing tendencies.

Improved Style Connecting Rods

Fork:

• Enhanced design for higher horsepower applications.
• Increased radius at beam to basket reduces fatigue cracking.
• Stiffer rod at pin end reduces twist and bend.

Blade:

• Slipper surface is micro-polished to reduce wear of the fishback bearing.
• Increased radius at the toe end reduces bearing failures.

Oil control is improved as a result of the honed liner with reduced bore distortion for longer
life and the use of pre-stressed stainless steel ring set. The benefit of this improvement is to
substantially increase running life.

Cylinder Liners are manufactured using state-of-the-art technology
providing our customers with a "one-unit" component. Our advanced
structural technology reduces stress concentration, thus yieldiing
outstanding dependability which translates to cost-saving for our customers.

Demand for product excellence has never been greater. Aware of this demand,
NREC pistons are manufactured for improved wear resistance. The quality
tooling of our piston's ring grooves as well as our attention to the
exterior piston coating is integral to this components quality. By
resisting chips, peel off and reduced liner scuffing we achieve maximum
performance and customer satisfaction.

NREC has a powerful advantage in the Cylinder Head market, using state-of-the-art
casting techniques to maintain excellent coolant flow and heat transfer
on the firing deck and throughout the Cylinder Head. Each component
is visually inspected internally in addition to over 39 standard
checkpoints to insure the highest quality products.

NREC products are changing the industry standards with dependable
power assembly components and service.

Fork

• Increased radius at beam to basket reduces fatique cracking. Stiffer rod at pin end reduces twist and bend.

Blade

• Slipper surface is micro-polished to reduce wear of the fishback bearing.
• Increased radius at the toe end reduces bearing failures.

NREC and VMV staff are on hand to immediately process your order.
Domestic Customer Service 800-447-7495
International Customer Service 618-241-9270